You are here

Stock Machines

APEC MODEL G30/20 5-AXIS GANTRY MACHINING CENTRE

APEC MODEL G30/20 5-AXIS GANTRY MACHINING CENTRE

In Stock
Details
APEC MODEL G30/20 5-AXIS GANTRY MACHINING CENTRE
APEC MODEL G30/20 5-AXIS GANTRY MACHINING CENTRE
In Stock

w/ HEIDENHAIN iTNC530

  • X/Y/Z: 2000/3000/1000 mm
  • B-axis: +/- 105 degrees
  • C-axis: +/- 200 degrees
  • Table size: 2000 x 3000 mm
  • Table load: 8000 kg/sq. meter
  • Spindle: 15,000 RPM (direct drive)
  • Spindle Motor: 45/45 Kw
  • Spindle taper HSK100A
  • Coolant through spindle (20 bar)
  • 40 position ATC
  • Heidenhain Linear encoders
  • Spindle cooling system
  • X/Y axes linear motor drive
  • X/Y/Z rapids: 60/60/40 M/min
  • Z-axis double ball screw
  • Kinematic opt.
  • BLUM Laser Tool Measuring NT-R4
  • BLUM Radio Part Probe TC-60
HONOR CNC VERTICAL LATHE MODEL VL-250CM

HONOR CNC VERTICAL LATHE MODEL VL-250CM

In Stock
Details
HONOR CNC VERTICAL LATHE MODEL VL-250CM
HONOR CNC VERTICAL LATHE MODEL VL-250CM
In Stock

w/ FANUC 0i-TD

  • Ram Z axis vertical travel: 1200 mm
  • Ram X axis cross travel -300+1650 mm
  • Max. swing diameter: 3000 mm
  • Max. turning dia.: 3000 mm
  • Max. turning height: 1600 mm
  • Max. table speed: 160 rpm
  • Vertical travel cross rail 1000 mm (4 steps x 250 mm)
  • Table dia.: 2500 mm
  • Table load: 15,000 kg
  • ATC: 16 positions: 6 turning 10 milling
  • Spindle (table) motor: 60/75 kw
  • Live spindle motor: 15/18.5 kw
  • Live spindle speed max 2250rpm (CAT50)
  • Full guarding
  • Chip conveyor
  • Coolant system with tank
  • Automatic lubrication system
  • Air conditioner for electrical cabinet
  • Coolant through tool holder 10 bar
  • Hydraulic unit air cooled
HURON 5-AXES MACHINING CENTER MODEL KX50L

HURON 5-AXES MACHINING CENTER MODEL KX50L

In Stock
Details
HURON 5-AXES MACHINING CENTER MODEL KX50L
HURON 5-AXES MACHINING CENTER MODEL KX50L
In Stock

w/ HEIDENHAIN ITNC 640

•    X/Y/Z travel: 3000/1700/900 mm
•    Vertical spindle
•    Spindle speed: 15,000 RPM (built in)/ HSK100A
•    Low pressure coolant 3 bars – 30 l/min
•    Through spindle coolant 70 bar
•    60 Position Tool magazine
•    Washing gun
•    Full guarding
•    Chip conveyor
•    Operator CNC panel
•    Remote hand wheel
•    Leveling jack and bolts
•    Transformer for 600V  
•    Part probe M&H
•    Tool probe laser BLUM
•    Spindle vibration detector
•    Kinematic Opt calibration
TONGTAI VERTICAL MACHINING CENTRE MODEL VP-8

TONGTAI VERTICAL MACHINING CENTRE MODEL VP-8

In Stock
Details
TONGTAI VERTICAL MACHINING CENTRE MODEL VP-8
TONGTAI VERTICAL MACHINING CENTRE MODEL VP-8
In Stock
In Stock
2 Sets

w/ MITSUBISHI M80

  • Axis travel X/Y/Z: 820/510/535 mm
  • Table size: 900x510 mm
  • X/Y/Z Rapids: 48/48/36 M/min
  • Max. weight of work piece: 500 kg
  • Coolant thru spindle 20 bar
  • 10,000 RPM Spindle, CAT 40 Big Plus
  • Spindle motor: 7.5/11 Kw, direct drive
  • 24 tools ATC
  • Spindle chiller
  • 4th axis interface
  • Chip conveyor
Goodway CNC Turning Center Model GS2800LYS_ Spindle: 35-3500 RPM

Goodway CNC Turning Center Model GS2800LYS

In Stock
Details
Goodway CNC Turning Center Model GS2800LYS
Goodway CNC Turning Center Model GS2800LYS_ Spindle: 35-3500 RPM
In Stock

w/ FANUC 0i-TD

  • Control upgraded with G-link 350 with 19” LCD
  • Spindle speed 35-3500 RPM (belt type)
  • 10” Kitagawa 3-jaw chuck with 1 soft jaw
  • 78 MM bar capacity
  • Box ways on all axes
  • 30/30M/MIN rapids on X/Z axes
  • Chip conveyor
  • Oil chiller
  • Parts catcher
  • Renishaw tool setter HPMA
  • Goodway 12 station built-in motor live tooling turret
  • 6” Kitagawa 3-jaw chuck sub-spindle with part ejector
  • CS-axis with disk brake on main & sub spindles
  • Y-Axis
  • Chip conveyor height 1200MM
  • Bar feeder interface with extra M code
  • 15 Bar coolant pump
  • Oil skimmer
  • Half moon type steady rest 30-180mm
  • 0 Degree live tool holder 2 pcs
  • 90 Degree live tool holder (two head for both spindle) 2 pcs
Goodway GLS 200

Goodway CNC Turning Center Model GLS-200

In Stock
Details
Goodway CNC Turning Center Model GLS-200
Goodway GLS 200
In Stock

w/ FANUC 0i-TF

  • X/Z stroke:  215/520 mm
    Max. turning length: 500 mm
    10.4” LCD screen
    42-4200 RPM spindle speed
    Fanuc AC spindle motor 11/15 KW
    12 Stations turret with tool holder package
    65 MM bar-capacity
    8” 3-jaw hydraulic chuck with soft & hard jaws
    Foot pedal for chuck
    Chip conveyor height 1200 mm
    Work light
    Hydraulic tailstock
    Live center for tailstock MT4
    Parts Catcher
    Renishaw HPMA tool setter
TONGTAI VERTICAL MACHINING CENTRE MODEL VP-10

TONGTAI VERTICAL MACHINING CENTRE MODEL VP-10

In Stock
Details
TONGTAI VERTICAL MACHINING CENTRE MODEL VP-10
TONGTAI VERTICAL MACHINING CENTRE MODEL VP-10
In Stock
In Stock
Goodway GLS 200

GOODWAY HORIZONTAL TURNING CENTER MODEL GLS-200

In Stock
Details
GOODWAY HORIZONTAL TURNING CENTER MODEL GLS-200
Goodway GLS 200
In Stock

w/ FANUC 0i-TF

•    X/Z stroke:  215/520 mm
•    Max. turning length: 500 mm
•    10.4” LCD screen
•    42-4200 RPM spindle speed
•    Fanuc AC spindle motor 11/15 KW
•    12 Stations turret with tool holder package
•    65 MM bar-capacity
•    8” 3-jaw hydraulic chuck with soft & hard jaws
•    Foot pedal for chuck
•    Chip conveyor height 1200 mm
•    Work light
•    Hydraulic tailstock 
•    Live center for tailstock MT4
•    Parts Catcher
•    Renishaw HPMA tool setter
TONGTAI 5-AXIS MACHINING CENTRE MODEL GT-800E

TONGTAI 5-AXIS MACHINING CENTRE MODEL GT-800E

On Order
Details
TONGTAI 5-AXIS MACHINING CENTRE MODEL GT-800E
TONGTAI 5-AXIS MACHINING CENTRE MODEL GT-800E
Arriving June 2017
On Order
2 Sets

w/ HEIDENHAIN iTNC640

  • X/Y/Z: 800/820/560mm
  • A-axis: +30/-120, C-axis: +/-360 degrees
  • Trunnion table diameter: 800 mm
  • Table load: 1000 kg
  • Spindle speed: 15,000 RPM (built-in)
  • Spindle Motor 40 KW
  • Rapid feed rates 48 M/min
  • Spindle cooling system
  • Spindle thermal compensation
  • Chip wash down coolant
  • Full enclosure
  • Cooler for electrical cabinet
  • Scraper type chip conveyor
  • A/C Axes rotary encoder
  • 40 position tool magazine (BBT40)
  • Coolant through spindle (40 bar)
  • Air through spindle with M code
  • Heidenhain linear scales on XYZ-Axes
  • Kinematic-opt
  • Renishaw Part & Tool Probes
AWEA 5-AXiS MACHINING CENTER MODEL FCV620

AWEA 5-AXIS MACHINING CENTER MODEL FCV620

On Order
Details
AWEA 5-AXIS MACHINING CENTER MODEL FCV620
AWEA 5-AXiS MACHINING CENTER MODEL FCV620
Arriving January 2017
On Order

w/ HEIDENHAIN iTNC530

  • X/Y/Z: 635/535/460mm
  • Heidenhain iTNC640 control (w/15” TFT LCD) full 5 axes function
  • Trunnion table diameter/swing: 500/650mm
  • Table load: 300 kg
  • Spindle speed: 15,000 RPM (direct drive)
  • Spindle Motor 10/14 KW
  • Linear guide waySpindle cooling system
  • LED super bright working light
  • Chip wash down coolant
  • Full enclosure
  • Cooler for electrical cabinet
  • Scraping type chip conveyor
  • A/C Axes rotary encoder
  • 40 position tool magazine (CAT40 Big Plus)
  • Coolant through spindle (20 bar)
  • Air through spindle with M code
  • Heidenhain linear scales on XYZ-Axes
  • Thermal compensation (V.3.3)
  • Kinematic-opt
  • Renishaw Part & Tool Probes
AWEA VP3012 Shown without roof enclosure

AWEA BRIDGE TYPE VERTICAL MACHINING CENTER MODEL VP3012

In Stock
Details
AWEA BRIDGE TYPE VERTICAL MACHINING CENTER MODEL VP3012
AWEA VP3012 Shown without roof enclosure
In Stock

w/ MITSUBISHI M80

  • X/Y/Z: 3000/1200/760mm
  • MITSUBISHI M80 control
  • Table size: 3000 x 1100mm
  • Table load: 4,500 kg
  • 10,000 RPM direct drive, 35 HP
  • CAT50 dual contact spindle
  • Coolant through spindle (20 bars)
  • 32 position tool magazine
  • Linear scales on X,Y and Z axes
  • Roof enclosure splash guard
  • Caterpillar type chip conveyor
  • Oil skimmer
  • Door interlock 
AWEA AF1600

Awea Vertical Machining Center Model AF1600

In Stock
Details
Awea Vertical Machining Center Model AF1600
AWEA AF1600
In Stock

w/ MITSUBISHI M70 

  • X/Y/Z: 1020/550/635mm
  • 10.4” LCD Monitor
  • Table size: 1200 x 550 mm
  • Table load: 700 kg
  • Spindle speed: 10,000 RPM (belt type)
  • Motor 15/18.5 KW
  • Coolant through spindle (20 bar)
  • Air through spindle with M code
  • Cutting feed rate 15 M/min.
  • Spindle taper (CAT-40)
  • Guideways: linear roller type
  • Caterpillar type chip conveyor
  • Wiring prep for 4th axis
  • Door interlock
  • Florescent light
  • 24 position high speed tool magazine
  • Full splash guard with roof
AWEA AF1000

Awea Vertical Machining Center Model AF1000

In Stock
Details
Awea Vertical Machining Center Model AF1000
AWEA AF1000
In Stock

w/ MITSUBISHI M70

X/Y/Z: 1020/550/635mm
10.4” LCD Monitor
Table size: 1200 x 550 mm
Table load: 700 kg
Spindle speed: 10,000 RPM (belt type)
Motor 15/18.5 KW
Coolant through spindle (20 bar)
Air through spindle with M code
Cutting feed rate 15 M/min.
Spindle taper (CAT-40)
Guideways: linear roller type
Caterpillar type chip conveyor
Wiring prep for 4th axis
Door interlock
Florescent light
24 position high speed tool magazine
Full splash guard with roof
Awea Bridge Type Model LP4021Z

Awea Bridge Type Model LP4021Z

Details
Awea Bridge Type Model LP4021Z
Awea Bridge Type Model LP4021Z

w/ FANUC 18iMB

  • X/Y/Z: 4000/2100/1000mm
  • 4,000 RPM (gear box driven spindle)
  • Table size: 4020 x 2010 mm
  • Table capacity: 12,000 kg
  • CAT-50 taper, 32 tools magazine
  • 4 Pcs splash guard without roof
  • 32 position tool changer
  • Caterpillar type chip conveyor
  • XYZ linear scale
  • Automatic tool length measuring system
  • Electric cabinet heat exchanger
  • Overhead swivel control panel
  • Door interlock
  • Data server + AI Nano
  • Flood coolant
Takumi VC0852-Mitsubishi M70

Takumi VC0852

In Stock
Details
Takumi VC0852
Takumi VC0852-Mitsubishi M70
In Stock
3 sets in stock S/N# VC05117/116/120

w/ MITSUBISHI M70

  • X/Y/Z: 860/520/610mm
  • Table size:1000 x 520 mm
  • Table load: 500 kg
  • Spindle speed: 12,000 RPM (Belt type)
  • Spindle drive motor: 7.5/11KW
  • 24 position tool changer CAT40
  • Spindle air blast
  • Heat exchanger for electrical cabinet
  • Full enclosure
  • Water and air gun
  • Ethernet & RS-232c interface
  • Spindle oil cooler
  • 4th Axis wiring prep
  • Belt type chip conveyor
  • Coolant through spindle system 30 bar
TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H10

TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H10

In Stock
Details
TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H10
TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H10
In Stock

w/ FANUC 31i-MB

  • X/Y/Z: 1020/700/500mm
  • CNC Control
  • Table size: 1050 x 700 mm
  • Table load: 800 kg
  • Spindle speed: 15,000 RPM (direct drive)
  • Rapid feed rate (X/Y/Z):32/32/32 m/min
  • Spindle power: 15/18.5 KW
  • Air conditioner for electrical cabinet
  • Coolant through spindle (20 bar)
  • Air through spindle with M code
  • 4th Axis wiring prep
  • 3-Axis linear scales
  • Oil skimmer
  • 30 position tool changer (BBT50)
  • Spindle chiller
  • Coolant & air guns
  • Ethernet & RS-232C interface
  • Steel belt chip conveyors
  • Full enclosed splash guard
Takumi High Speed Bridge Type Machining Center Model H16

Takumi High Speed Bridge Type Machining Center Model H16

In Stock
Details
Takumi High Speed Bridge Type Machining Center Model H16
Takumi High Speed Bridge Type Machining Center Model H16
In Stock

w/ HEIDENHAIN iTNC-530

  • X/Y/Z: 1600/1300/700mm
    Table size: 1900 x 1300 mm
    Table load: 6,000 kg
    Spindle speed: 10,000 RPM (direct drive)

    Rapid feed rate (X/Y/Z):30/30/30 m/min
    Spindle power: 22/30 kw
    Air/oil spindle bearing lubrication
    Air conditioner for electrical cabinet
    Coolant through spindle (20 bars)
    Air through spindle with M code
    LOSMA G1000 Mist Collector
    4th Axis wiring prep
    3-Axis linear scale
    Oil skimmer
    32 Tools-arm type (CAT-50 Big Plus)
    Spindle chiller
    Coolant & air guns
    Steel belt chip conveyors
    Full enclosed splash guard
    BLUM A3 Laser Tool Setter
TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H32T

TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H32T

In Stock
Details
TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H32T
TAKUMI BRIDGE TYPE VERTICAL MACHINING CENTER MODEL H32T
In Stock
2 Sets

w/ HEIDENHAIN iTNC-530

  • X/Y/Z: 3200/2250/800mm
  • Table size: 3320 x 2100 mm
  • Table load: 12,000 kg
  • Spindle speed: 10,000 RPM (direct drive), 22/46 KW
  • Air/oil spindle bearing lubrication
  • Coolant through spindle (70 bar)
  • Rapid feed rate (X/Y/Z):16/16/20 (X-axis cooled ball screw)
  • 3-Axes linear scales
  • Oil skimmer
  • 60 position tool changer (CAT-50)
  • 4Th Axis wiring prep
  • Steel belt Chip conveyor
  • Spindle oil chiller
  • Coolant & air gun
  • LOSMA G200 Mist Collector
  • BLUM A3Laser Tool offset & TC50 part probe
  • Manual pulse generator
  • Fully enclosed splash guard
  • ATS (air through spindle) with M code
Takumi Model B6 40000 RPM, Selca CNC 3040D

TAKUMI VERTICAL MACHINING CENTER MODEL B6

In Stock
Details
TAKUMI VERTICAL MACHINING CENTER MODEL B6
Takumi Model B6 40000 RPM, Selca CNC 3040D
subject to prior sale
In Stock
Two sets in stock S/N# PF104/PF105

w/ SELCA 3040D

  • X x Y x Z : 800 x 600 x 450mm
  • Table work area: 900 x 600mm
  • Table load: 1,200 kg
  • 40000 RPM (Built in Spindle)
  • Motor 12 KW
  • Spindle taper (HSK-40)
  • Guideway: Linear rail
  • Spindle oil cooler
  • 20 Tool magazine
  • Catepillar type chip conveyor
  • Chip wash down coolant
  • Full chip enclosure with dust collector
  • Transformer for 600V
Takumi Vertical Machining Center Model V12-mitsubishi M70

Takumi Vertical Machining Center Model V12

In Stock
Details
Takumi Vertical Machining Center Model V12
Takumi Vertical Machining Center Model V12-mitsubishi M70
In Stock
Two sets

w/ MITSUBISHI M70

  • X/Y/Z: 1200/660/610mm
  • [Description: v12_s_S] Table size:1350 x 690 mm
  • Table load: 1100 kg
  • Rapid feed rate (X/Y/Z): 20/20/12 m/min.
  • Spindle speed: 12,000 RPM (Belt type)
  • Spindle drive motor: 9/11 KW
  • Coolant through spindle 20 bars
  • 24 position tool changer (CAT-40)
  • Chip conveyor (Belt type)
  • Spindle chiller
  • Coolant & air gun
  • Fully enclosed splash guard
  • Ethernet & RS-232 interface
  • Heat exchanger for electrical cabinet
  • Oil Skimmer
  • 4th Axis wiring prep
Huron High Speed Milling Center Model K3x8 Five

Huron High Speed Milling Center Model K3x8 Five

In Stock
Details
Huron High Speed Milling Center Model K3x8 Five
Huron High Speed Milling Center Model K3x8 Five
In Stock

w/ SIEMENS 840D SL

•    X/Y/Z travel: 780/700/500 mm
•    Ethernet network, shopmill & telediagnostic link
•    Rotary / swiveling table Ø 500 mm on 55° angle
•    Vertical spindle
•    Spindle speed: 24,000 RPM (built in)/ HSK63A
•    Low pressure coolant 3 bars – 30 l/min
•    20 Tools magazine
•    Washing gun
•    Full guarding
•    Chip conveyor
•    Operator NC panel
•    Remote hand wheel
•    Leveling jack and bolts
•    Transformer for 600V  
•    Part probe M&H
•    Tool probe laser BLUM
•    Spindle vibration detector
OMV ESTREMA 5 AXES MACHINING CENTER

OMV ESTREMA 5 AXIS MACHINING CENTER

In Stock
Details
OMV ESTREMA 5 AXIS MACHINING CENTER
OMV ESTREMA 5 AXES MACHINING CENTER
subject to prior sale
In Stock

w/ HEIDENHAIN iTNC530 Plus

  • X/Y/Z: 1600/1100/700mm
  • Table work area: 2900 x 1200mm
  • Rotary table load: 800 kg
  • electro spindle 22 KW, 30000 RPM
  • Spindle taper HSK 50
  • 45 Tool magazine with ATC arm
  • Caterpillar type chip conveyor
  • Chip wash down coolant
  • Full splash guard
  • Integrated tilting rotary table 800mm Ø
  • A-axis 120 rpm/B-axis 60 rpm feedrates
Fagima Dominus 5 AX 3200

Fagima Dominus 5 AX 3200

In Stock
Details
Fagima Dominus 5 AX 3200
Fagima Dominus 5 AX 3200
In Stock

w/ HEIDENHAIN iTNC-530

  • X/Y: 3200/1200 mm
  • Z:
    • 1500 with head in vertical position
    • 1600 with head in horizontal position
  • Electro-spindle HSK100A, 12,000 RPM
  • Spindle motor power: 34 kw (S1) 37 kw (S6)
  • Coolant through spindle 40 bar
  • Table size: 1200 x 1200 mm
  • Table full continuous axis
  • Table load capacity: 8,000 kg
  • Two 30 position tool changers
  • Electrical cabinet conditioner
  • Chiller for head rotation and electro-spindle
  • Rotating head 4th axis, +/- 120 degrees
  • Heidenhain linear scales on X,Y,Z axes
  • Heidenhain motors and servomotors
  • Chip conveyor
  • Fully enclosed cutting area
  • High intensity lighting
CHMER 5-AXIS WIRE EDM MODEL GX640L

CHMER 5-AXIS WIRE EDM MODEL GX640L

In Stock
Details
CHMER 5-AXIS WIRE EDM MODEL GX640L
CHMER 5-AXIS WIRE EDM MODEL GX640L
In Stock
  • Axis travel X/Y/Z: 600/400/300 mm
  • Auxiliary table travel U,V: 100/100 mm
  • Max. weight of work piece: 600 kg
  • Max. size of work piece: 910 x 700 x 295 mm
  • Max. wire feed rate: 300mm/sec.
  • Auto wire threader (AWT)
  • 2-in-1 AVR + transformer (575V ~ 220V)
  • Wire chopper
  • Touch screen
  • Extra paper filter
  • Linear drives on X, Y and Z axes
Everising Saw Model V-0625HA

Everising Saw Model V-0625HA

In Stock
Details
Everising Saw Model V-0625HA
Everising Saw Model V-0625HA
subject to prior sale
In Stock
  • Cutting capacity: 600 (H) x 2500 (D)mm
  • Blade speed: 15-70 m/min
  • Blade motor: 7.5 HP, Hydraulic: 3 HP, Coolant: 3/4HP
  • Blade size: 9900 x 41x 1.3 mm
  • Movable saw head for space saving
  • Sawhead moves by hydraulic cylinder
  • Linear guide way for shuttling and locking.
  • Saw guide elevation is hydraulically operated.
  • Independent control panel
  • NC control with 9 different jobs.
  • Full stroke hydraulic clamping vise.
  • Hydraulic blade tension
  • One M42 Bi-metal saw blade
  • Additional portable control panel
  • Hydraulic shuttle table
  • Outfeed power/dead roller table, 3 metres long
  • Automatic chip conveyor
Ecoca MT-415MC/2000MM

ECOCA HORIZONTAL TURNING CENTER MODEL MT-415MC

In Stock
Details
ECOCA HORIZONTAL TURNING CENTER MODEL MT-415MC
Ecoca MT-415MC/2000MM
subject to prior sale
In Stock

w/ FANUC 0iTD

  • X/Z travel: 265/2020mm (max. turning length: 1950mm)
  • 10.4” color LCD
  • Spindle speed: 2500rpm (belt transmission)
  • Spindle nose: ASA A2-11, 15” Kitigawa chuck
  • Maximum diameter thru spindle 117.5mm
  • 12 station turret (Power turret, Baruffaldi brand, live tooling)
  • C axis with brake on spindle
  • Rapid feedrate for X & Z axes: 20 & 16 m/ min. (box way)
  • Hydraulic tailstock quill programmable
  • Fully enclosed splash guard
  • Spindle motor Fanuc P40 6000i (18.5/22kw)
  • 15” Kitagawa chuck instead of standard chuck
  • Chip conveyor with bucket
  • Tool setter
  • ZF gear box (2 steps)
  • Axial rotary tool holder (for power turret)
  • Radial rotary tool holder (for power turret)