w/ HEIDENHAIN ITNC 640

•    X/Y/Z travel: 3000/1700/900 mm
•    Vertical spindle
•    Spindle speed: 15,000 RPM (built in)/ HSK100A
•    Low pressure coolant 3 bars – 30 l/min
•    Through spindle coolant 70 bar
•    60 Position Tool magazine
•    Washing gun
•    Full guarding
•    Chip conveyor
•    Operator CNC panel
•    Remote hand wheel
•    Leveling jack and bolts
•    Transformer for 600V  
•    Part probe M&H
•    Tool probe laser BLUM
•    Spindle vibration detector
•    Kinematic Opt calibration

GOODWAY HORIZONTAL TURNING CENTER MODEL GLS3300Y

w/ FANUC 0i-TF with G-LINC & 19” colour LCD

•       Spindle speed 30-3000 RPM (belt type)

•       Spindle drive 18.5/22 Kw

•       12” 3-jaw chuck with soft & hard jaws

•       Live tooling turret

•       CF-axis with disc brake

•       90 MM bar capacity

•       Y-axis

•       20/24M/MIN rapids on X/Z axes

•       Chip conveyor 1200mm height

•       Renishaw tool setter HPMA

•       Parts catcher with  collection box

•       Chip conveyor height 1200MM

•       Bar feeder interface with extra M code

•       7 Bar coolant pump

•       0 Degree live tool holder 2 pcs

•       90 Degree live tool holder 2 pcs

w/ HEIDENHAIN iTNC640

• X/Y/Z: 800/820/560mm
• A-axis: +30/-120, C-axis: +/-360 degrees
• Trunnion table diameter: 800 mm
• Table load: 1000 kg
• Spindle speed: 15,000 RPM (built-in)
• Spindle Motor 40 KW
• Rapid feed rates 48 M/min
• Spindle cooling system
• Spindle thermal compensation
• Chip wash down coolant
• Full enclosure
• Cooler for electrical cabinet
• Scraper type chip conveyor
• A/C Axes rotary encoder
• 40 position tool magazine (BBT40)
• Coolant through spindle (40 bar)
• Air through spindle with M code
• Heidenhain linear scales on XYZ-Axes
• Kinematic-opt
• Renishaw Part & Tool Probes

GOODWAY HORIZONTAL TURNING CENTER MODEL GLS2000LY

w/ MITSUBISHI M80 CONTROL

•       Spindle speed 42-4200 RPM (belt type)

•       Spindle Motor 11/15 Kw

•       8” 3-jaw chuck with soft & hard jaw

•       65 MM bar capacity

•       30/30M/MIN rapids on X/Z axes

•       Chip conveyor

•       Oil chiller

•       Parts catcher

•       Renishaw tool setter HPMA

•       Goodway 12 station built-in motor live tooling turret

•       CS-axis with disk brake

•       Y-Axis

•       Chip conveyor height 1200MM

•       Bar feeder interface with extra M code

•       7 Bar coolant pump

•       Oil skimmer

•       Hydraulic tailstock

•       0 Degree live tool holder 2 pcs

•       90 Degree live tool holder 2 pcs

GOODWAY HORIZONTAL TURNING CENTER MODEL GLS-200M

w/ FANUC 0iTF control with 8.4” screen

•       X/Z stroke:  215/520 mm

•       Max. turning length: 500 mm

•       7 bar coolant pump

42-4200 RPM spindle speed

•       Fanuc AC spindle motor 11/15 KW

•       12 Stations live tooling turret

•       CS axis on spindle

•       65 MM bar-capacity

•       8” 3-jaw hydraulic chuck with soft & hard jaws

•       0 degree & 90 degree live tool holders

•       Foot pedal for chuck

•       Chip conveyor height 1200 mm

•       Work light

•       Hydraulic tailstock

•       Live center for tailstock MT4

•       Renishaw HPMA tool setter

•       Parts catcher

•       Oil skimmer

MAXXTRON MODEL B25

Travels X/Y/Z, 2500/1800/1100mm

Spindle HSK100, 15,000RPM

Spindle motor, 24.5/63 kW

Heidenhain linear scales

Fully enclosed splash guard

Through spindle coolant, 70 bar

60 position tool changer

Air through spindle

2 screw type chip collectors

Belt chip conveyor, chip cart

Coolant Flush System

Mist collector

BLUM NT-A3 laser tool measurement system

Oil skimmer

Door interlock

Air conditioned electrical cabinet

Isolated transformer for 600V

AWEA BRIDGE TYPE VERTICAL MACHINING CENTER MODEL SP3016

With FANUC 0iMF

•       X/Y/Z: 3060/1600/760mm

•       Table size: 3260 x 1500mm

•       Table load: 10,000 kg

•       6,000 RPM geared drive, 30/35 HP

•       CAT50 spindle (dual contact)

•       Coolant through spindle (20 bars)

•       Air through spindle

•       40 position tool magazine

•       iConsole

•       Linear scales on X,Y and Z axes

•       High speed processing, 200 block look ahead

•       Roof enclosure splash guard

•       Isolation Transformer for 600V

•       Caterpillar type chip conveyor

•       Data server + AICC2

•       iConsole

•       Oil skimmer

•       Door interlock

AWEA VERTICAL MACHINING CENTER MODEL AF760

w/ MITSUBISHI M80

•       X/Y/Z: 762/510/510mm

•       15” LCD Monitor

•       Table size: 860 x 510 mm

•       Table load: 500 kg

•       Spindle speed: 10,000 RPM (belt type)

•       Motor 7.5/11 KW

•       Coolant through spindle (20 bar)

•       Air through spindle with M code

•       Cutting feed rate 15 M/min.

•       Spindle taper (CAT-40)

•       Guideways: linear roller type

•       Caterpillar type chip conveyor

•       Wiring prep for 4th axis

•       Door interlock

•       Florescent light

•       24 position high speed tool magazine

•       Full splash guard with roof

AWEA VERTICAL MACHINING CENTER MODEL AF1000

w/ FAGOR 8065 CNC Control

•       X/Y/Z: 1020/550/635mm

•       15” LCD Monitor

•       Table size: 1200 x 550 mm

•       Table load: 700 kg

•       Spindle speed: 10,000 RPM (belt type)

•       Motor 18.5/32 KW

•       Coolant through spindle (20 bar)

•       Air through spindle with M code

•       Cutting feed rate 15 M/min.

•       Spindle taper (CAT-40)

•       Guideways: linear roller type

•       Caterpillar type chip conveyor

•       Wiring prep for 4th axis

•       Door interlock

•       Florescent light

•       24 position high speed tool magazine

•       Full splash guard with roof

MAXXTRON BRIDGE TYPE MACHINING CENTRE

MODEL B11 with MITSUBISHI M830 control

•       Travels X/Y/Z, 1050/700/500mm

•       Spindle CAT 40, 15,000RPM

•       Spindle motor, 15/18.5 kW

•       Heidenhain linear scales

•       Fully enclosed splash guard

•       Through spindle coolant, 20 bar

•       30 position tool changer

•       Air through spindle

•       2 screw type chip collectors

•       Belt chip conveyor, chip cart

•       Oil mist cutting

•       Mist collector

•       Oil skimmer

•       Door interlock

•       Air conditioned electrical cabinet

•       Isolated transformer for 600V

TONGTAI 5-AXIS MACHINING CENTRE MODEL CT-350 (2 sets)

w/ HEIDENHAIN iTNC640 (15” LCD screen)

•       X/Y/Z: 400/510/510mm

•       A-axis: +30/-120, C-axis: +/-360 degrees

•       Trunnion table diameter: 350 mm

•       Table load: 200 kg

•       Spindle speed: 15,000 RPM (direct drive)

•       Spindle Motor 17 KW

Rapid feed rates 36 M/min

•       Spindle cooling system

•       Chip wash down coolant

•       Full enclosure

•       Cooler for electrical cabinet

•       Scraper type chip conveyor

•       A/C Axes rotary encoder

•       24 position tool changer (CAT40 Big Plus)

•       Coolant through spindle (20 bar)

•       Air through spindle with M code

•       Heidenhain Kinematic-opt

•       Oil skimmer

HURON 5-AXES MACHINING CENTER MODEL UMILL-6

c/w HEIDENHAIN TNC 640

•       X/Y/Z travel: 700/740/550 mm

•       Kinematic OPT with hardware

•       Rotary / swiveling table Ø 600 mm, 600 Kg. capacity

•       Vertical spindle, A-axis -20/+110 deg. C-axis 360 deg.

•       Spindle speed: 15,000 RPM (built in)/CAT 40 (Big Plus)

•       Low pressure coolant 3 bars – 30 l/min

•       30 Tools magazine

•       Washing gun

•       Full guarding

•       Chip conveyor

•       Operator NC panel

•       Remote hand wheel

•       Leveling jack and bolts

•       Transformer for 600V 

•       CTS preparation

•       Linear scales on 3 axes

•       Spindle vibration detector

AWEA BRIDGE TYPE VERTICAL MACHINING CENTER MODEL LP4025YF

w/ HEIDENHAIN iTNC640

•       X/Y/Z: 4000/3200/760mm

•       6,000 RPM (gear box driven spindle), 50 HP

•       Table size: 4020 x 2400 mm

•       Table capacity: 15,000 kg

•       CAT-50 taper (dual contact)

•       Coolant through spindle, 70 bar

•       Air through spindle

•       Full splash guard with roof

•       60 position tool changer, 60 pull studs

•       Caterpillar type chip conveyor

•       XYZ linear scales

•       Electric cabinet heat exchanger

•       Overhead swivel control panel

•       Door interlock

•       High speed processing, 600 block look ahead

•       Oil Skimmer

•       Automatic R/A Head, 5 degree positioning, coolant through

•       Horizontal/Vertical tool changer

•       Isolation Transformer 600V

GOODWAY HORIZONTAL TURNING CENTER MODEL GS-280Y

w/ FANUC 0iTF

•       10.4” LCD, Manual Guide I

•       Y-axis

40-4000 RPM spindle speed

•       Spindle motor 11/15 KW

•       12 Stations Live tooling turret

•       C-axis with disc brake on main spindle

•       78 MM bar-capacity

•       10” 3-jaw hydraulic chuck with soft & hard jaws

•       Foot pedal for chuck

•       Chip conveyor height 1200 mm

•       Work light

•       Hydraulic tailstock

•       Live center for tailstock MT4

•       Parts Catcher

•       Renishaw HPMA tool setter

•       0 Degree live tool holder 2 pcs

•       90 Degree live tool holder 2 pcs

GOODWAY HORIZONTAL TURNING CENTER MODEL GS2000YS

w/ FANUC 0i-TF

•       Spindle speed 48-4800 RPM (belt type)

•       8” Kitagawa 3-jaw chucks on each spindle

•       51 MM bar capacity

•       Box ways on all axes

•       30/30M/MIN rapids on X/Z axes

•       Chip conveyor

•       Oil chiller

•       Parts catcher

•       Renishaw tool setter HPMA

•       Goodway 12 station built-in motor live tooling turret

•       CS-axis with disk brake on main & sub spindles

•       Y-Axis

•       Chip conveyor height 1200MM

•       Bar feeder interface with extra M code

•       15 Bar coolant pump

•       Oil skimmer

•       0 Degree live tool holder 2 pcs

•       90 Degree live tool holder 2 pcs

GOODWAY HORIZONTAL TURNING CENTER MODEL GLS-200

w/ FAGOR 8065T CNC control

•       X/Z stroke:  215/520 mm

•       Max. turning length: 500 mm

•       15” LCD screen

42-4200 RPM spindle speed

•       Fanuc AC spindle motor 11/15 KW

•       12 Stations turret with tool holder package

•       65 mm bar-capacity

•       8” Kitigawa 3-jaw hydraulic chuck with soft & hard jaws

•       Foot pedal for chuck

•       Chip conveyor height 1200 mm

•       Work light

•       Hydraulic tailstock

•       Live center for tailstock MT4

•       Parts Catcher

•       Renishaw HPMA tool setter

w/ FANUC 0i-TD

• Ram Z axis vertical travel: 1200 mm
• Ram X axis cross travel -300+1650 mm
• Max. swing diameter: 3000 mm
• Max. turning dia.: 3000 mm
• Max. turning height: 1600 mm
• Max. table speed: 160 rpm
• Vertical travel cross rail 1000 mm (4 steps x 250 mm)
• Table dia.: 2500 mm
• Table load: 15,000 kg
• ATC: 16 positions: 6 turning 10 milling
• Spindle (table) motor: 60/75 kw
• Live spindle motor: 15/18.5 kw
• Live spindle speed max 2250rpm (CAT50)
• Full guarding
• Chip conveyor
• Coolant system with tank
• Automatic lubrication system
• Air conditioner for electrical cabinet
• Coolant through tool holder 10 bar
• Hydraulic unit air cooled

GOODWAY HORIZONTAL TURNING CENTER MODEL GA2000

w/ FAGOR 8065T

•       15” LCD display

•       Spindle speed 48-4800 RPM (belt type)

•       8” Kitagawa 3-jaw chuck with 1 soft jaw

•       65 MM bar capacity

•       Box ways on all axes

•       20/24M/MIN rapids on X/Z axes

•       Chip conveyor 1200mm height

•       Renishaw tool setter HPMA

•       Chip conveyor height 1200MM

•       Bar feeder interface with extra M code

•       7 Bar coolant pump

•       Oil skimmer

w/ FANUC 0i-TF

• X/Z stroke:  215/520 mm
  Max. turning length: 500 mm
  10.4” LCD screen
  42-4200 RPM spindle speed
  Fanuc AC spindle motor 11/15 KW
  12 Stations turret with tool holder package
  65 MM bar-capacity
  8” 3-jaw hydraulic chuck with soft & hard jaws
  Foot pedal for chuck
  Chip conveyor height 1200 mm
  Work light
  Hydraulic tailstock
  Live center for tailstock MT4
  Parts Catcher
  Renishaw HPMA tool setter

w/ FANUC 0i-TF

•    X/Z stroke:  215/520 mm
•    Max. turning length: 500 mm
•    10.4” LCD screen
•    42-4200 RPM spindle speed
•    Fanuc AC spindle motor 11/15 KW
•    12 Stations turret with tool holder package
•    65 MM bar-capacity
•    8” 3-jaw hydraulic chuck with soft & hard jaws
•    Foot pedal for chuck
•    Chip conveyor height 1200 mm
•    Work light
•    Hydraulic tailstock 
•    Live center for tailstock MT4
•    Parts Catcher
•    Renishaw HPMA tool setter

w/ MITSUBISHI M70 

• X/Y/Z: 1020/550/635mm
• 10.4” LCD Monitor
• Table size: 1200 x 550 mm
• Table load: 700 kg
• Spindle speed: 10,000 RPM (belt type)
• Motor 15/18.5 KW
• Coolant through spindle (20 bar)
• Air through spindle with M code
• Cutting feed rate 15 M/min.
• Spindle taper (CAT-40)
• Guideways: linear roller type
• Caterpillar type chip conveyor
• Wiring prep for 4th axis
• Door interlock
• Florescent light
• 24 position high speed tool magazine
• Full splash guard with roof

w/ MITSUBISHI M70

X/Y/Z: 1020/550/635mm
10.4” LCD Monitor
Table size: 1200 x 550 mm
Table load: 700 kg
Spindle speed: 10,000 RPM (belt type)
Motor 15/18.5 KW
Coolant through spindle (20 bar)
Air through spindle with M code
Cutting feed rate 15 M/min.
Spindle taper (CAT-40)
Guideways: linear roller type
Caterpillar type chip conveyor
Wiring prep for 4th axis
Door interlock
Florescent light
24 position high speed tool magazine
Full splash guard with roof

w/ MITSUBISHI M80

• X/Y/Z: 2000/1200/760mm
• MITSUBISHI M80 control
• Table size: 3000 x 1100mm
• Table load: 4,500 kg
• 10,000 RPM direct drive, 35 HP
• CAT50 dual contact spindle
• Coolant through spindle (20 bars)
• 32 position tool magazine
• Linear scales on X,Y and Z axes
• Roof enclosure splash guard
• Caterpillar type chip conveyor
• Oil skimmer
• Door interlock 

w/ HEIDENHAIN iTNC530 Plus

• X/Y/Z: 1600/1100/700mm
• Table work area: 2900 x 1200mm
• Rotary table load: 800 kg
• electro spindle 22 KW, 30000 RPM
• Spindle taper HSK 50
• 45 Tool magazine with ATC arm
• Caterpillar type chip conveyor
• Chip wash down coolant
• Full splash guard
• Integrated tilting rotary table 800mm Ø
• A-axis 120 rpm/B-axis 60 rpm feedrates

w/ HEIDENHAIN iTNC-530

• X/Y: 3200/1200 mm
• Z:
  • 1500 with head in vertical position
  • 1600 with head in horizontal position
• Electro-spindle HSK100A, 12,000 RPM
• Spindle motor power: 34 kw (S1) 37 kw (S6)
• Coolant through spindle 40 bar
• Table size: 1200 x 1200 mm
• Table full continuous axis
• Table load capacity: 8,000 kg
• Two 30 position tool changers
• Electrical cabinet conditioner
• Chiller for head rotation and electro-spindle
• Rotating head 4th axis, +/- 120 degrees
• Heidenhain linear scales on X,Y,Z axes
• Heidenhain motors and servomotors
• Chip conveyor
• Fully enclosed cutting area
• High intensity lighting

• Axis travel X/Y/Z: 600/400/300 mm
• Auxiliary table travel U,V: 100/100 mm
• Max. weight of work piece: 600 kg
• Max. size of work piece: 910 x 700 x 295 mm
• Max. wire feed rate: 300mm/sec.
• Auto wire threader (AWT)
• 2-in-1 AVR + transformer (575V ~ 220V)
• Wire chopper
• Touch screen
• Extra paper filter
• Linear drives on X, Y and Z axes

• Cutting capacity: 600 (H) x 2500 (D)mm
• Blade speed: 15-70 m/min
• Blade motor: 7.5 HP, Hydraulic: 3 HP, Coolant: 3/4HP
• Blade size: 9900 x 41x 1.3 mm
• Movable saw head for space saving
• Sawhead moves by hydraulic cylinder
• Linear guide way for shuttling and locking.
• Saw guide elevation is hydraulically operated.
• Independent control panel
• NC control with 9 different jobs.
• Full stroke hydraulic clamping vise.
• Hydraulic blade tension
• One M42 Bi-metal saw blade
• Additional portable control panel
• Hydraulic shuttle table
• Outfeed power/dead roller table, 3 metres long
• Automatic chip conveyor